Introduction; User's Responsibility For Safety; Unpacking And Control; Electromagnetic Compatibility - bürkert 8025 Bedienungsanleitung

1 INTRODUCTION

BEFORE INSTALLING OR USING THIS
PRODUCT, PLEASE READ THE ENTIRE
MANUAL THOROUGHLY.
This will enable you to fully profit from all of
the advantages offered by this product.

1.1 Unpacking and Control

Please verify that the product is complete
and free from any damage. Compare the
Type specifications on the label to the
adjacent list to ensure that you have re-
ceived the proper unit. If there is any loss or
damage, please contact your local Bürkert
subsidiary.
1.2 About this Manual
This manual does not contain any warranty
statement. Please refer to our general terms
of sale and delivery.
Only properly-trained staff should install
and/or repair this product. If difficulties
should occur at the time of installation,
please contact your nearest Bürkert sales
office for assistance.
FLOW TRANSMITTER 8025

1.3 User's Responsibility for Safety

Bürkert manufactures a broad range of
transmitters. While each of these products
is designed to operate in a wide variety of
applications, it is the user's responsibility
to select the appropriate transmitter model
for his application, install it properly, and
maintain all components. Special attention
must be paid to the chemical resistance of
the transmitter against the fluids which are
directly contacting the product.
This symbol appears in the
manual to call special attention
to instructions that affect the
safe installation, function and
use of the product.

1.4 Electromagnetic compatibility

This device fulfills the essential require-
ments of te directives 2004/108/EC (EMC)
and 73/23/EC (DBT).
In order to comply with the directives, the
wiring instructions must be followed.
The device has been tested according to
the following EMC standards:
- EN 61000-6-3
- EN 61000-6-2
- EN 61010-1
E-2-