Introduction; Unpacking And Control; About This Manual; User's Responsibility For Safety - bürkert 8225 Bedienungsanleitung

1 INTRODUCTION

Dear Customer,
Congratulations on your purchase of our
8225 digital conductivity transmitter.
BEFORE INSTALLING OR USING THIS
PRODUCT, PLEASE TAKE OUR ADVICE
AND READ THE ENTIRE MANUAL
THOROUGHLY.
This will enable you to benefit fully from all
of the advantages which the product can
offer.

1.1 Unpacking and Control

Please verify that the product is complete
and free from any damage and that you have
recieved the following as a standard
delivery:
-1 8225 digital conductivity Transmitter
-1 Operating Instruction Manual
To ensure that you have recieved the
product required, please compare the Type
specification (Bürkert identification number)
on the label to the lists on the following
pages. If there are any problems such as
loss or damage, please contact your local
Bürkert subsidiary.

1.2 About this Manual

This manual does not contain any form of
warranty or statement and full referal to our
general terms of sale and delivery should
be noted.
CONDUCTIVITY 8225
This product should only be installed and/or
repaired by correctly trained staff. If any
difficulties may occur with the product during
installation, please do not hesitate to contact
your nearest Bürkert sales office for
assistance.

1.3 User's Responsibility for Safety

Bürkert manufactures a broad range of
conductivity transmitters designed to
operate in a wide variety of applications. It
is the customer's responsibility to select an
appropriate transmitter for the application,
ensure the unit is installed correctly, and
maintain all components. Special attention
must be made to the chemical resistance of
the transmitter and the fluids/medium which
maybe in direct contact with the product.
If this symbol appears, it indicates
!
that special attention should be
made to the instructions, as they
may affect the safe installation, function or/
and use of the product.

1.4 Electromagnetic compatibility

This device conforms to the EMC-Directive
of the Council of European Communities
89/336/EEC.
In order to comply with the above directive,
the wiring instructions must be followed as
instructed.
E-2-
8225-COMP-**