Copyright; Before You Start; Getting Started; Loading The Coolbox - Crivit CEK 22 A1 Bedienungsanleitung Und Sicherheitshinweise

WARNING! Never place the coolbox, furniture or other
heavy objects on the connection cable and make sure it
does not get kinked.
WARNING! Never tie knots in the connection cable and
do not tie it to other cables. The connection cable must be
laid so that nobody can trip over it or be obstructed by it.

5. Copyright

All the contents of this user manual are protected by copyright and provided to the reader for
information only. Copying data and information without the prior explicit written consent of the
author is strictly forbidden. This also applies to any commercial use of the contents and information.
All texts and diagrams are up-to-date as of the date of printing. Subject to change without notice.

6. Before you start

Remove the coolboxfrom the packaging.
Check the coolbox for damage. If the coolbox is damaged, do not use it.

7. Getting started

Prior to using the coolbox for the first time, it is recommended that you clean it for hygiene reasons.
See also the chapter 8.3 "Cleaning".
Because of the materials used, there can be a slight product-specific smell inside the coolbox
before it is used for the first time. This smell is perfectly harmless, but, for hygiene reasons, we
recommend wiping the inside and outside of the coolbox with a damp cloth before using it for
the first time (see also Chapter "8.3 Cleaning"). Do not store unwrapped food in it.
In keep-warm mode, the coolbox switches off when the internal temperature reaches around
65 °C.

7.1 Loading the coolbox

Move the carry handle [5] forwards. Now open the lid [2]. Place the food and drinks in the
coolbox. If you wish to keep food cool, it is best to use pre-chilled food and drink. Close the lid [2]
after loading. Move the carry handle [5] backwards.
Crivit CEK 22 A1
English - 23