Dismounting, Return And Disposal - WIKA F2220 Betriebsanleitung

8. Dismounting, return and disposal

8. Dismounting, return and disposal
8.1 Dismounting
EN
Release the load from the tension/compression force transducer and disconnect from
power. Remove the tension/compression force transducer from the mounting.
8.2 Return
Strictly observe the following when shipping the instrument:
All instruments delivered to WIKA must be free from any kind of hazardous substances
(acids, bases, solutions, etc.) and must therefore be cleaned before being returned.
When returning the instrument, use the original packaging or a suitable transport
packaging.
To avoid damage:
1. Wrap the instrument in an antistatic plastic film.
2. Place the instrument, along with the shock-absorbent material, in the packaging.
Place shock-absorbent material evenly on all sides of the transport packaging.
3. If possible, place a bag containing a desiccant inside the packaging.
4. Label the shipment as carriage of a highly sensitive measuring instrument.
Information on returns can be found under the heading "Service" on our
local website.
8.3 Disposal
Incorrect disposal can put the environment at risk.
Dispose of instrument components and packaging materials in an environmentally
compatible way and in accordance with the country-specific waste disposal regulations.
Do not dispose of with household waste. Ensure a proper disposal in
accordance with national regulations.
18
OI_F2220_F2221_F2226.indb 18 OI_F2220_F2221_F2226.indb 18
WIKA operating instructions, models F2220, F2221, F2226
01.07.2021 11:33:43 01.07.2021 11:33:43