Maintenance And Cleaning - WIKA F2220 Betriebsanleitung

7. Maintenance and cleaning

7. Maintenance and cleaning
For contact details see chapter 1 "General information" or the back page
of the operating instructions.
7.1 Maintenance
This instrument is maintenance-free.
Repairs must only be carried out by the manufacturer.
Only use original parts (see chapter 10 "Accessories").
7.2 Cleaning
1. Prior to cleaning, disconnect the tension/compression force transducer from the
voltage supply and dismount it.
2. Clean the tension/compression force transducer with a cloth.
Electrical connections must not come into contact with moisture!
CAUTION!
Damage to the instrument
Improper cleaning may lead to damage to the instrument!
▶
▶
7.3 Recalibration
DAkkS certificate - official certificates:
We recommend that the tension/compression force transducer is recalibrated by the
manufacturer at regular time intervals of approx. 24 months. The basic settings will be
corrected if necessary.
WIKA operating instructions, models F2220, F2221, F2226
OI_F2220_F2221_F2226.indb 17 OI_F2220_F2221_F2226.indb 17
Do not use any aggressive cleaning agents.
Do not use any hard or pointed objects for cleaning.
EN
17
01.07.2021 11:33:43 01.07.2021 11:33:43