Controls And Functions - Eizo ColorEdge CG301W Installationshandbuch

Controls and Functions

Adjustment menu (ScreenManager
1 2 3 4
Input Signal Selection
1
button
2 Mode button
3 Enter button
Control buttons
4
(Left, Down, Up, Right)
5 Power button
6 Power indicator
7 Stand
8 Security lock slot
9 USB port (UP)
10 Input signal connectors
11 Power connector
12 USB port (DOWN)
* S
creenManager is an EIZO's nickname of the Adjustment menu. (For how to use ScreenManager, refer to the User's Manual on the
®
CD-ROM.)
*)
®
5 6 9 10
Switches input signals for display when two PCs are connected to the monitor.
Displays the Fine Contrast menu.
Displays the Adjustment menu, determines an item on the menu screen, and
saves values adjusted.
Chooses an adjustment item or increases/decreases adjusted values for
advanced adjustments using the Adjustment menu.
Turns the power on or off.
Indicates monitor's operation status.
Blue: Operating Orange: Power saving
When the timer is set for ColorNavigator, notifies that a recalibration is required
(for CAL mode or EMU mode).
Used to adjust the height of the monitor.
Complies with Kensington's MicroSaver security system.
Connects the USB cable in order to use the provided software. For how to use
it,
refer to the User's Manual on the CD-ROM.
Left: DVI-D connector (SIGNAL1 DUAL LINK) / Right: DVI-D connector
(SIGNAL2)
Connects the power cord.
Connects peripheral USB devices.
7
12
8
11
Off: Power off
3