Installation/Removal - WIKA UPT-20 Betriebsanleitung

7. Display and operating unit, model DI-PT-U

7.3 Installation/Removal

CAUTION!
Ingress of moisture.
Moisture can destroy the process transmitter.
GB
- Protect the opened process transmitter against moisture.
- Close the case head tightly.
1. Screw off the case head cover by hand.
2. Installation:
Pull out the push-on cap and attach the display and operating unit into any of the
locking positions (0°, 90°, 180°, 270°).
Removal:
Pull out the display and operating unit and attach the push-on cap.
3. Screw on the case head cover.
- Ensure that the case head is tightly closed.
26
All manuals and user guides at all-guides.com
WIKA operating instructions process transmitter, model UPT-2x