Herunterladen Inhalt Inhalt Diese Seite drucken

Product Overview; Specifications; Attachments/Accessories; Operation - Toro Reccycler 21768 Bedienungsanleitung

Mit smartstow
Vorschau ausblenden Andere Handbücher für Reccycler 21768:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

Product Overview

1. Handle
2. Self-propel bar
3. Blade-control bar
4. Adjustment for the
self-propel drive
5. Rear deflector (not shown) 13. Bag-on-demand lever
6. Washout port (not shown) 14. Handle-height adjustment
7. Fuel-tank cap
8. Air filter
1. Grass bag
Figure 7
9. Spark plug
10. Cutting-height lever (4)
11. Side-discharge deflector
12. Oil fill/dipstick
knob (2)
15. Handle knob (2)
16. Recoil-start handle
Figure 8
2. Side-discharge chute

Specifications

Model
Weight
38 kg
21768
(83 lb)

Attachments/Accessories

A selection of Toro approved attachments and
accessories is available for use with the machine
to enhance and expand its capabilities. Contact
your Authorized Service Dealer or authorized Toro
distributor or go to www.Toro.com for a list of all
approved attachments and accessories.
To ensure optimum performance and continued safety
certification of the machine, use only genuine Toro
replacement parts and accessories. Replacement
parts and accessories made by other manufacturers
could be dangerous, and such use could void the
product warranty.

Operation

g311243
Note:
Determine the left and right sides of the
machine from the normal operating position.

Before Operation

Before Operation Safety

General Safety
Always shut off the machine, wait for all moving
parts to stop, and allow the machine to cool before
adjusting, servicing, cleaning, or storing it.
Become familiar with the safe operation of the
equipment, operator controls, and safety signs.
Check that all guards and safety devices, such as
deflectors and/or grass catcher, are in place and
functioning properly.
Always inspect the machine to ensure that the
g027237
blades and blade bolts are not worn or damaged.
Inspect the area where you will use the machine,
and remove all objects that could interfere with
the operation of the machine or that the machine
could throw.
Contact with the moving blade will cause serious
injury. Do not put your fingers under the housing
when adjusting the cutting height.
8
Length
Width
Height
157 cm
61 cm
(62
(24
inches)
inches)
112 cm
(44
inches)

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis