Wireless; Wireless Setup - Gallagher HR5 Benutzerhandbuch

3E3183 Gallagher HR5 Hand Held EID Tag Reader User Manual

Wireless

The HR5 Reader is both Bluetooth and WiFi enabled and can be
searched for and connected to by other devices (Discoverable), or
perform a search to initiate the connection itself. Only one Bluetooth
or one Wifi device can be connected to the reader at any time.
Note: WiFi functionality is only available on HR5 v2 hardware.
Icon Descriptions
Icon

Wireless Setup

1. From the Main Menu screen, use the arrow keys to select the
Wireless icon
2. The Wireless screen will display, showing the last known
connection as either Bluetooth (default for first time
connections) or WiFi.
• To change the type of communication, select the field where
Bluetooth or WiFi is displayed and press
to change the communication type and press
Note: Selecting
battery power if a communication connection is not required.
3. The connection status and device table display and the connection
status changes to 'Discoverable' mode.
Note: The table will be empty if no devices have previously been
found. Any previously connected devices will be displayed in
parentheses. e.g. '(Gallagher-TSi)'
20
Description
Flashing Searching for a Bluetooth or WiFi device
Steady Bluetooth or WiFi device connected
Blue
Grey / No Bluetooth or WiFi connection active,
Red line but Reader is Discoverable, or Reader is
trying to connect to a device.
No icon Bluetooth or WiFi disabled
OK
and press
None
turns off Bluetooth and WiFi, and saves
.
OK
. Use the arrow keys
OK
.