Mothering In A Session; Auto Increment Vid Numbers In A Session - Gallagher HR5 Benutzerhandbuch

3E3183 Gallagher HR5 Hand Held EID Tag Reader User Manual

Mothering in a session

Mothering mode in a session allows the ID of the Dam to be
linked with its offspring automatically. It is possible to record
trait information against both the Dam and offspring, but it is not
possible to sort during a mothering session.
See "Reading a tag with Mothering selected" (p. 14) for more
details.

Auto increment VID numbers in a session

The automatic increment of VID numbers in a session is used to
assign sequential visual ID numbers to animals that are being
scanned for the first time. To use automatic increment, manually
enter the VID of the first animal in the usual manner (ref xxxx).
Provided that this VID ends with a numeric value, the next animal
scanned will be assigned the next free VID value in the sequence.
For example; The first animal is scanned and the tag number is
manually entered "TAG001". When the next animal is scanned, the
reader will automatically assign the next tag number, "TAG002",
without any manual entry.
See "Enter a VID manually" (p. 14) for more details.
How to start a new session
1. From the Main Menu screen select the Session icon
OK
press
2. On the Session Menu, select
The session name is automatically created based on the
current date and an alphanumeric character.
• The session name can be changed. Use
the arrow keys to select field, press
Enter new name using keypad.
3. To add a note to the session, use the arrow
keys to select the
4. Specify the session options for trait
recording, sorting or mothering, and
automatic incrementing of VID numbers,
using the arrow keys.
Note: Sort by List and Mothering cannot be used together.
5. Press the
6. If Yes was selected for Record Traits, a list of traits available
will be displayed.
10
.
Note
field and press
Next
softkey to proceed to session setup.
New Session
and press
OK
.
OK
.
and
OK
.