AERMEC FCWI-Serie Bedienungs- Und Installationsanleitung Seite 32

The LED lights up to show that the timer is set.
To cancel this function, press the TIMER key again. The
AUTO STOP TIMER
While the system is on, it can be programmed to turn off in advance with a range of 1-24 hours.
• Press the TIMER key. The 2-digit LED will blink the last setting.
• To increase/decrease the setting by 1 hour, press the
• The 2-digit LED will blink the setting for 5 seconds.
The LED lights up to show that the timer is set.
To cancel this function, press the TIMER key again. The
SLEEP
Press the SLEEP key to start the Sleep function. The
After 1 hour, the controlled temperature will be automatically adjusted for greater comfort and energy savings during Sleep mode.
The LED will switch off in exactly this moment.
To cancel this function, press the SLEEP key again.
NB: the SLEEP function can be used only in COOL, HEAT or AUTO mode.
ECONO
Press the ECONO key to start the energy saving function. The ECO LED will light up.
The controller will adjust the controlled temperature and fan speed automatically for the energy saving purpose.
To cancel this function, press the ECONO key again.
NB: the ECONO function can be used only in COOL, HEAT or AUTO mode.
TURBO
Press the TURBO key to start the fast cooling/heating function. The
The controller will adjust the controlled temperature and fan speed automatically for 30 minutes. The
and the temperature and fan speed settings will assume the settings used prior to turbo activation. To cancel this function before
the 30 minutes have elapsed, press the TURBO key again.
NB: the TURBO function can be used only in COOL, HEAT or AUTO mode.
LED BRIGHTNESS DIMMING
Press & hold the and
To bring the brightness level back to normal, press & hold the
SUPPORTED WIRELESS REMOTE CONTROL
The wireless remote control command can be received via the infrared receiver on this unit. The compatible functions are:
• POWER on/off, MODE fan/cool/dry/heat/auto, FAN auto/high/medium/low
• TEMPERATURE setting 18-30ºC, TIMER on/off 0-24 hours in advance
• SWEEP, SLEEP, TURBO, ECONO
For more details of "which functions are available in each handset" and "how to operate the handset", please refer to that hand-
set's manual or specification.
32
POWER OFF
POWER OFF
LED will light up.
POWER OFF
POWER OFF
POWER OFF
POWER OFF COOL
keys for 3 seconds to adjust the brightness of all the LEDs.
POWER OFF POWER OFF
LED will switch off.
POWER ON
COLD
or key.
POWER ON
LED will switch off.
COOL HEAT
POWER ON
POWER OFF
COLD
POWER ON
COLD
POWER ON
POWER OFF
COOL
HEAT
POWER ON
HEAT
LED will light up.
POWER ON POWER ON
and keys for 3 seconds.
POWER OFF POWER OFF
COLD
POWER ON POWER ON
COOL COOL
POWER OFF
POWER OFF POWER OFF
POWER OFF COOL
POWER ON
COLD
COOL
POWER OFF POWER OFF POWER OFF
POWER ON
COOL
HEAT
POWER OFF COOL
POWER OFF
LED will then switch off
POWER OFF
COLD
POWER OFF POWER OFF
HEAT HEAT
POWER OFF POWER OFF
POWER ON
COLD
POWER ON POWER ON
COLD COLD
POWER ON
HEAT
POWER ON POWER ON
POWER ON
COOL
HEAT COLD HEAT
POWER ON
HEAT
POWER ON
COLD
POWER OFF
POWER ON
COOL
HEAT
POWER OFF
POWER ON POWER ON
COLD COLD
POWER ON POWER ON
COOL COOL HEAT HEAT