Makita VC3211M Betriebsanleitung Seite 7

ENGLISH (Original instructions)
1. Suction force adjusting knob
2. Hose diameter selection dial
3. Switch lever
4. Outlet cap
5. Power supply cord
6. Hose band
7. Base hook
8. Front cuffs
9. Hose
SPECIFICATIONS
Voltage
Power consumption
Connected load for appliance
socket
Total connected load
Volume flow (air)
Recoverable capacity
• Due to our continuing program of research and development, the specifications herein are subject to change without
notice.
• Specifications may differ from country to country.
• Weight according to EPTA-Procedure 01/2003
Symbols
The following show the symbols used for the equipment.
Be sure that you understand their meaning before use.
......... Read instruction manual.
....................... Take particular care and attention.
...................... Warning! The cleaner may contain
hazardous dust.
...................... Never stand on the cleaner.
...................... Dust class M (medium). The cleaners
are capable of picking up dust class L
and M. Follow your county's
regulations relating to dusts and to
occupational health and safety.
Explanation of general view
10. FREE position
11. LOCK position
12. Stopper lever
13. Caster
14. Filter bag
15. Holder plate
16. Polyethylene bag
17. Tank
18. Tank cover
Model
Countries
Volt
Watt
Watt at symbol mode
Watt at symbol mode
Watt
Model
With 28 mm X 3.5 m hose
With 38 mm X 2.5 m hose
Vacuum
Type of protection
Dimensions (L x W x H)
Net weight
Safety class
END112-2
19. Hook
20. Cap
21. Powder filter
22. Damper
23. Prefilter
24. Level sensors
25. Multi-hook
EU Switzerland
230-240 230-240
1,050 1,050
2,400 1,100
2,600 1,400
3,450 2,150
Dust
Water
................ Only for EU countries
Do not dispose of electric equipment
together with household waste
material!
In observance of European Directive
2012/19/EU on waste electric and
electronic equipment and its
implementation in accordance with
national law, electric equipment that
have reached the end of their life must
be collected separately and returned to
an environmentally compatible
recycling facility.
Intended use
The tool is intended for collecting both wet and dry dust.
The tool is suitable for commercial use, for example in
hotels, schools, hospitals, factories, shops, offices and
rental businesses.
VC3211M
UK
110 230-240
1,050
600
850
1,650
VC3211M
3
2.0 m /min.
3
3.5 m /min.
22 kPa
IP X4 (splash-proof)
32 L
27 L
552 mm x 398 mm x 685 mm
16.9 Kg
Class I
1,050
1,900
2,100
2,950
ENE084-1
7