Remote Control / Battery Exchange / Operation - Skandika Home Vibration Plate 500 Bedienungsanleitung

Remote control
Operation
Switching on/o
Press the ON/OFF button to start the unit and press it again to turn it o .
Setting the time
Press the TIME (+) button to increase the time and TIME (-) to decrease it.
Setting the speed
Press the SPEED (+) button to increase the speed and SPEED (-) to decrease it.
Selecting the mode
Press the MODE key: the display „00" stands for manual programme, the display „P1, P2, P3" for
automatic programmes.
Note: If you press the SWITCH button once, the gentle mode is activated, if you press the button
again, the strenuous mode.
No. Button
1 TIME
2 SPEED
3 ON/OFF
4 MODE
5 STRONG
6 SOFT
Battery exchange:
The remote control requires a CR 2025 3V button cell battery. The battery
compartment is located on the back. If the unit no longer responds to the
remote control, replace the button cell battery with a new one.
23
REMOTE CONTROL / BATTERY EX
CHANGE / OPERATION
Function
Increase and decrease time
Increase and decrease speed
To turn on or o
Program selection
Powerful mode
Soft mode