Loudness On / Off - PERFECTPRO ROCKHART Bedienungsanleitung

NOTE
1.
That not all player applications or devices may
respond to all of these controls.
2.
Some mobile phones may temporarily disconnect
from your radio when you make or receive calls. Some
devices may temporarily mute their Bluetooth audio
streaming when they receive text messages, emails
or for other reasons unrelated to audio streaming.
Such behaviour is a function of the connected device
and does not indicate a fault with your radio.
Pairing another device to your radio
Before pairing another device to the speaker, you need to
make the radio discoverable.
1.
Press and hold the Bluetooth pair button to make the
radio discoverable again and the Bluetooth status
indicator flashes.
2.
Follow step 3-4 in the previous section of Pairing your
Bluetooth device for the first time.
Playing previously-paired devices
GB
This unit can memorize up to 8 sets of paired device,
when the memory exceed this amount, the earliest device
will be over written.
NL
If your Bluetooth device already paired with the radio
previously, the unit will memorize your Bluetooth device
and it attempts to reconnect with a device in memory
D
which is last connected. If the last connected device is not
available, the radio will be discoverable.
You can also choose to pair a previously-paired device
F
stored in the memory, following the steps below:
Press and release the Pair button to enter the Bluetooth
device memory. Then rotate the Tuning control to find the
desired memorized Bluetooth device and press the Tuning
control to connect to the required Bluetooth device.
Disconnecting your Bluetooth device
Press the Source button to select any bands other than
Bluetooth band. Alternatively, press and hold the Bluetooth
pair button to disconnect the link.
If you disconnect the Bluetooth device when you are in
Bluetooth mode, the LED light for Bluetooth icon will then start
to flash indicating Bluetooth is discoverable again for pairing.
Pairing and playing your device via
NFC
ROCKHART is equipped with wireless NFC (Near Field
Communication) feature, allowing playing NFC-enabled devices
to pair and play the music. For non-NFC devices, please refer
to the above sections for standard Bluetooth pairing.
1.
Turn on your NFC feature on your device. (Important:
Please make sure the screen of your playing device is
on and unlocked to allow NFC to work.)
2.
Touch the NFC area of your playing device against the
NFC area marked on top right panel of your radio. The
unit will switch to Bluetooth mode and enter automatic
pairing. If you pair with your radio for the first time,
your NFC-enabled device will be asked the permission
to link with the radio. Once paired with a device, the
Bluetooth icon will remain illuminated.
8
3.
Use the controls on your device or on your radio to play
/ pause and navigate tracks.
NOTE
1.
If you would like to link another Bluetooth device for
the first time via NFC, disconnect the existing linked
Bluetooth device first.
2.
The location of the NFC detection area is not the
same on all devices. When connecting with other
Bluetooth device via NFC, refer to the User guide of
the other device for more information.
3.
Some of metallic case or cover for mobile phones
may reduce the sensitivity of NFC. Make sure you
remove it, before activating the NFC.
Disconnecting your NFC-enabled device
To disconnect your device, simply touch it again on the top
of the unit. The LED light for Bluetooth icon will then start to
flash indicating your radio is discoverable again for pairing.
(Important: Please make sure the screen of your playing
device is on and unlocked to allow NFC to work.)
Sleep timer-radio auto shut off
Your radio can be set to turn off automatically after a preset
time has elapsed. The Sleep Timer setting can be adjusted
between Sleep off, 15, 30, 45, 60, 90 and 120 minutes.
1.
Press and hold the Menu button until the Advanced
menu of the current setting shows on the display.
2.
Rotate the Tuning control until 'Sleep' appears on the
display. Then press the Tuning control to enter the
setting menu.
3.
Rotate the Tuning control to cycle through the options
of Sleep off, 15,30, 45, 60, 90 and 120 minutes (use
the 'Sleep off' to cancel the sleep function). Then press
the Tuning control to confirm the setting. Your radio will
switch off automatically after the preset Sleep Timer
has elapsed.
4.
To cancel the Sleep Timer function before the preset
time has elapsed, simply press and release the
Standby button to turn the unit off manually.
Equalizer function (EQ)
The sound on your radio can be adjusted to suit your
personal taste for the songs you are listening to. It has six
preset equalizer modes.
Press the EQ button to cycle through the various modes.
a.
Flat – no tone modification is applied.
b.
Rock
c.
Outdoor
d.
Pop
e.
News
f.
Indoor

Loudness On / Off

Press and release the Loudness button to get enhanced
bass and the display will appear 'LOUDNESS' when
Loudness function is applied.