Ex-Factory Attachment; Waste Container Attachment; Removing The Waste Container - Kärcher MC 250 Betriebsanleitung

Contents
1 Ex-factory attachment .................................................
1.1 Waste container attachment .......................................
1.1.1 Removing the waste container.................................
2.0.1 Attaching the waste container..................................
2.0.2 Emptying the waste container..................................
2.0.3 EU Declaration of Conformity ..................................
2.0.4 Emergency operation hydraulic valve ......................
2.1 Opening/closing the lock.............................................
2.2 2-brush sweeping system attachment (ex works).......
2.2.1 View of the device for a 2-brush sweeping system..
2.2.2 Requirements for removal/installation......................
2.2.3 Removing the 2-brush sweeping system attachment
2.2.4 Attaching the 2-brush sweeping system attachment
2.2.5 Control assignments for a vacuum sweeper with a 2-
brush sweeping system .......................................
2.2.6 2-brush system care work........................................
2.2.7 Adjusting the sweeping area....................................
2.2.8 Storage ....................................................................
2.3 3-brush sweeping system attachment (ex works).......
2.3.1 View of the device for a 3-brush sweeping system..
2.3.2 Requirements for removal/installation......................
2.3.3 Removing the 3-brush sweeping system .................
2.3.4 Installing the 3-brush sweeping system ...................
2.3.5 Control assignments for a vacuum sweeper with a 3-
brush sweeping system .......................................
2.3.6 Using the weed brush ..............................................
2.3.7 Transport lock ..........................................................
2.3.8 Care work ................................................................
2.3.9 Adjusting the sweeping area....................................
2.3.10 Storage ..................................................................
2.4 Sweeping mode ..........................................................
2.4.1 Symbols on the display when sweeping ..................
2.4.2 Intersection function.................................................
2.4.3 Sound proofing attachment kit (ex-factory option) ...
2.4.4 Fill the fresh water tank / recycling water tank .........
2.4.5 Working with water spray.........................................
2.4.6 Water circulation system / recycling mode...............
2.4.7 Sweeping .................................................................
2.4.8 Brush contact pressure pedal ..................................
2.4.9 Checking the filling level of the waste container ......
2.5 Care and service.........................................................
2.5.1 Cleaning the suction mouth and suction system......
2.5.2 Draining the waste water/recycling water ................
2.5.3 Cleaning the recycling system .................................
2.5.4 Cleaning the blower .................................................
2.5.5 Cleaning the waste container...................................
2.5.6 Cleaning the vehicle ................................................
2.6 Front power lift ............................................................
2.6.1 Intended use ............................................................
2.6.2 Installing the front power lift .....................................
2.6.3 Removing the front power lift ...................................
2.7 Attachment frame attachment kit ................................
2.8 High-pressure cleaner attachment (ex-factory)...........
2.8.1 Symbols on the display during sweeping.................
2.8.2 Intended use ............................................................
2.8.3 Safety information ....................................................
2.8.4 Operation .................................................................
2.8.5 Care and service......................................................
2.8.6 Troubleshooting guide .............................................
2.8.7 Technical data ..........................................................
2.8.8 Installation declaration .............................................
2.9 Manual suction hose attachment (ex-factory) .............
2.9.1 Working with the manual suction hose ....................
1

Ex-factory attachment

1.1

Waste container attachment

27
27
The waste container attachment can only be used in con-
27
junction with a Kärcher brush sweeping system or scrub-
30
bing system. These attachments are described after the
30
chapter.
31

1.1.1 Removing the waste container

32
32
The waste container can only be removed and set down
32
when the support attachment kit (optional) is used. The de-
32
scription assumes the use of the support attachment kit.
32
DANGER
33
Risk of injury from the waste container
33
Keep a sufficient distance from the waste container and
the supports when removing/installing.
34
Maintain a sufficient clearance to the hazard zone and stop
35
35 raising/lowering of the waste container immediately when
35
a person enters the hazard zone.
36
Secure the raised waste container with the safety supports
36
when you work underneath.
36
Only remove the waste container when it is completely
36
empty.
37
ATTENTION
Risk of injury and damage
38
Set the waste container down only on a level and smooth
38
39
surface.
39
1. Empty the waste container before removing the waste
39
container. See chapter "Emptying the waste container".
40
40
40
40
40
41
41
42
42
42
42
43
43
43
43
44
44
Figure: Waste container secured
44
Waste container
1
44
Safety support
44 2
Sealing collar
44 3
2. Raise the waste container until the safety supports can
45
46 be folded forward. See chapter "Emptying the waste
46
container".
46
3. Lower the waste container onto the safety supports.
46
47
47
47
48
48
48
48
49
English 27