Appendices - Hillrom Welch Allyn KleenSpec 800 Serie Bedienungsanleitung

6 English
Inspect the system
1. Examine all components of the cordless illumination system regularly. Components include
the illuminator and charging base.
2. If any component is worn or damaged, replace it with a Hill Rom-approved part. For ordering
information, contact your local Hill Rom representative:
Disposal
Disposal must be in accordance with the following steps:
1. Follow the cleaning and disinfection instructions presented in this instructions for use.
2. Segregate material in preparation for the recycling process.
3. Disassemble and recycle components based on the type of material:
•
•
•
•
Users must adhere to all federal, state, regional, and/or local laws and regulations as it pertains to
the safe disposal of medical devices and accessories. If in doubt, the user of the device shall first
contact Hillrom Technical Support for guidance on safe disposal protocols.

Appendices

Appendix A: Specifications
Charging station power supply classification: US, Canada, & International; Class I and
internally powered
Characteristic
Input
Output
Category
Plastic to be recycled as plastic waste
Metal to be recycled as metal
Includes loose components containing more than 90% metal by weight
○
Includes screws and fasteners
○
Electronic components, including the power cord, to be disassembled and recycled as
Waste of Electrical and Electronic Equipment (WEEE)
Batteries to be dismantled from the device and recycled as per WEEE
Welch Allyn® KleenSpec 800 Series Cordless Illumination System
hillrom.com/en-us/about-us/locations
Specification
100-240v / 50-60Hz
160-80 mA
5v DC
1400 mA
Not AP/APG Equipment