EUROM Alutherm 1000 Wi-Fi Benutzerhandbuch Seite 30

1. Place the device on a vertical and solid
surface. Use a spirit level when placing the
device (Figure 9, pos. 1).
2. Place the device with a minimum distance
(Figure 9) of:

150 cm from the ceiling;

30 cm from the side walls;

30 cm from the floor;

50 cm clearance on the front side.
3. Do not mount the device:

immediately below a socket outlet;

on a ceiling or roof.
4. Drill two holes at least 610 mm above the
floor and with a distance of (Figure 10, pos.
A):

Alutherm 1000: 255 mm;

Alutherm 1500: 400 mm;

Alutherm 2000: 563 mm;

Alutherm 2500: 655 mm.
5. Place wall plugs (Figure 10, pos. 2).
6. Screw and tighten a left and a right bracket
(Figuer 10, pos. 3) to the wall with a large
screw (Figure 10, pos. 4) using a Phillips
screwdriver (Figure 10, pos. 1).
7. Lay the device down on a soft steady surface
(Figure 11, pos. 4).
8. Screw and tighten two brackets (Figure 11,
pos. 1) on both sides of the main body (Figure
11, pos. 5) with a small screw (Figure 11, pos.
2) using a Phillips screwdriver (Figure 11, pos.
3).
30
Figure 9
Figure 10
Figure 11