Herunterladen Inhalt Inhalt Diese Seite drucken

EUROM Alutherm 1000 Wi-Fi Benutzerhandbuch Seite 35

Vorschau ausblenden Andere Handbücher für Alutherm 1000 Wi-Fi:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 43
8.
01 SET OFF will appear on the screen; repeat step 7 to indicate the deactivation time.
9.
02 appears on the screen, there are two options:
Set next activation and deactivation times, repeat step 7 and 8 for every desired time.
Make sure the timer settings do not contradict each other: maximum 28 per week,
maximum 4 per day.
If you are done setting the activation and deactivation times, wait till screen returns to
standard settings.
10. The screen will show P and the device will automatically switch on and off at the set
time.
View weekly timer setting
1.
Press repeatedly on WEEK. You will see the following timer settings, one after the other:
one-off or repeated;
anticipation on or off;
temperature setting;
timer on-time;
timer off-time;
next timer setting.
Turning off weekly timer setting
1.
Press and hold the WEEK button until 01 appears on the screen.
2.
Press and hold the MOD until TIME disappears from the screen to indicate that the data
will be retained but will not be active. By pressing MOD again until TIME appears, you
will reactivate the timer.
Deleting weekly timer setting
1.
Press and hold the WEEK button until 01 appears on the screen.
2.
Go past 01- ][ and on/off first by pressing SET briefly.
3.
When the number of the timer setting that you wish to change appears, press SET for a
little longer. You will hear a short beep and the selected setting has been deleted.
4.
If you wish to delete all timer settings, press the WEEK button and hold. Press and hold
the MOD and SET buttons at the same time, until you hear a beep. The screen will show
88:88, indicating that all settings have been deleted.
ECO mode
The remote control has an ECO button for an energy-efficient mode; the device maintains the
room temperature at 16°C.
1.
Press the ECO button to activate; EC appears on the screen.
2.
Press the ECO button to deactivate.
If the heater is working in ECO mode and a timer setting becomes active, the device will start
to work according to the timer setting. When the timer setting ends and the device goes off,
the device will not return to the ECO mode.
35

Quicklinks ausblenden:

Werbung

Inhaltsverzeichnis
loading

Diese Anleitung auch für:

Alutherm 1500 wi-fiAlutherm 2000 wi-fiAlutherm 2500 wi-fi360714360721360745 ... Alle anzeigen

Inhaltsverzeichnis