Technical Data; Features; Performance - SICK TDR Betriebsanleitung

EN
Operating instructions
System commands
130 Restore factory settings
160 Store echo curve in device
161 Set default setpoints
163 AutoCalibrate

9 Technical data

9.1 Features

Medium
Detection type
Probe length
Adjustable measuring range
Process pressure
Process temperature
GOST certificate
RoHS certificate
IO-Link
UL certificate

9.2 Performance

Accuracy
1)
Repeatability
1)
Resolution
Response time
3)
106 8014825/YE12/2014-09-15 © SICK AG • Level sensors • Germany • Subject to change without notice
9 Technical data
Resets all SPDUs back to factory settings.
Stores the current echo curve in the device. The echo curve
can be read out again and analyzed by specialists at SICK AG.
If the memory space reserved for this function is full, then the
function will be ignored and no new curves will be saved.
Sets all switching and analog characteristic curve values to
standard values according to the factory setting.
This function corresponds to the commissioning procedure
described in Chapter 6.1.
Liquids
Limit, continuous
Mono-rod probe 200 mm to 2,000 mm
1,000 mm, 2,000 mm, 3,000 mm, 4,000 mm
Cable probe
95 mm to 6,005 mm
–1 bar to 10 bar
–20°C to +100°C
l
l
l
l
±5 mm
≤ 2 mm
< 2 mm
< 400 ms
LFP Cubic