Cleaning And Maintenance - LIVARNO LUX IAN 101510 Bedienungs- Und Sicherheitshinweise

Operation / Cleaning and maintenance
Note: To do this you will require a crosshead screwdriver.
A llow the bulb
Note: Ensure that the lamp shade
last screw
6
S crew out the screws
remove all the glass-retainers.
R emove the lamp shade
U se a clean, fluff-free cloth when you are replacing a bulb.
D raw the defective bulb
T hen insert a new bulb (max. 20 W) into the socket.
Note: Ensure that the pins are correctly engaged in the socket.
P lace the lamp shade
S crew in the screws
Note: Ensure that the brackets of the glass-retainers rest properly
against the lamp shade

Cleaning and maintenance

CAUTION! DANGER TO LIFE FROM ELECTRIC SHOCK!
Before cleaning, always pull out the mains plug out of the socket. For
electrical safety reasons, never clean the lamp with water or other
fluids or immerse it in water.
D o not use solvents such as petrol and the like as they could
damage the lamp.
Use a dry, fluff-free cloth for cleaning.
T he lamp is maintenance-free.
48 GB
to cool down completely.
8
is released.
in the direction
6
.
7
out of the socket.
8
back into the recess.
7
in the direction
6
.
7
does not fall out when the
7
and completely
.