Factory Setting; Configuration - WIKA GDT-20 Betriebsanleitung

5. Commissioning, operation
System requirements
At least Microsoft
EN
Windows is a registered trademark of Microsoft Corporation in the United States and other
countries.

5.4.2.1 Factory setting

The COM port allocated at the PC has to be set for the access to the
transmitter. Upon delivery, the address is set to 247 and the baud rate is
configured with 19200.
With these settings, the transmitters can be read via the button
"download from device".

Configuration

Tag number: WIKA
■
Address: 247
■
Baud rate: 19,200
■
Parity: none
■
Termination: Off
■
Gas mixture SF
■
Gas mixture partner: N
■
18
Windows
®
[%]: 100 %
6
2
WIKA operating instructions transmitter, models GDT-20, GDHT-20
7 (32-bit)
®