Maintenance; Dismantling; Disposal - Heidolph Hei-VAP Industrial Betriebsanleitung

Attachments

Maintenance

There are no user-serviceable components in the unit housing. If necessary, in the
event of abnormal operating behavior such as excessive noise or heat generation, for
example, contact our technical service, see "Contact information Heidolph international"
on page 155.
➜ Check for tight fit the caps and fasteners of all glass components at regular
intervals and especially before each start-up of the device.
➜
Check the PTFE seal of the EASY LOCK flask clamping system at regular intervals
for heavy contamination and visible damage.
➜
Clean the PTFE seal of the EASY LOCK flask clamping system in regular preventive
manner to prevent strong deposits or crustings.
CAUTION: Risk of property damage, loss of production
At loose/leaky connections, ambient air is sucked in during the
vacuum build-up and the required vacuum pressure cannot be
reached in a stable manner!
In case of excess pressure, there is a risk that fluid will escape
from the system! The device and surrounding areas can be severely
contaminated by leaking media!
➜
➜
➜

Dismantling

Observe the instructions given in the associated assembly instructions when disman-
tling the device.

Disposal

➜
➜
➜
➜
Tighten loose caps/fasteners by hand or correct the seating of
the retaining clips.
Clean the PTFE seal of the EASY LOCK flask clamping system
at regular intervals and depending on the use of the device and
the processed media!
Replace the PTFE seal of the EASY LOCK flask clamping system
if it shows visible damage!
When disposing of the device, observe the provisions of the
WEEE Directive 2012/19/EU and its transposition into national
law in the country of use.
When disposing of portable batteries, observe the provisions of
the European Battery Directive 2013/56/EU and their transpo-
sition into national law in the country of use.
Check the device and all components for residues of substances
that are hazardous to health, the environment, and biohaz-
ardous before disposing.
Properly remove and dispose residues of substances that are
hazardous to health, the environment and biohazardous!
154