Miele professional A 203 Gebrauchsanweisung Seite 42

en - Areas of application
Trocars without
lumens
42
Place the valve onto an E 454 injector nozzle for trocar sleeves or

E 453 with holding clamps.
Position the valve with the spring clamp or holding clamp so that

the cleaning solution can reach critical areas through the side aper‐
tures.
Trocars without lumens or micro instruments can be reprocessed in
the E 441/1 insert.
Push the trocar into the retainers.

Put the insert in a free place in one of the mobile units or baskets.
