Basic Operations; Turning On The Power - JVC KD-LX333R Bedienungsanleitung

Turning on the power

1
Turn on the power.
The display illuminates and the
control panel and control dial
come out.
2
Select the source.
ATT Each time you press the button,
SOURCE
the source changes as follows:
For KD-LX333R:
= FM = DAB tuner** = CD*
= CD changer** = External component
= AM = (back to the beginning)
For KD-LX111R:
= FM = DAB tuner** = CD*
= CD changer** (or external
component***) = AM
= (back to the beginning)
* If a CD is not in the loading slot, you cannot
select CD as the source to play.
** Without connecting the CD changer and/or
the DAB tuner, you cannot select it as the
source to play.
***To select the external component, set the
"EXT INPUT" setting to "LINE INPUT."
(See page 28.)
To operate the tuner (FM or AM),
see pages 9 – 11.
To operate the CD player,
see pages 19 – 21.
To operate the CD changer,
see pages 34 – 36.
To operate the external component,
see page 37.
To operate the DAB tuner,
see pages 38 – 41.

BASIC OPERATIONS

SEL TP/PTY
S T
3
1
BAND ATT
EQ MONO
DISP MODE
8
7
D M
SOURCE
2
3
Adjust the volume.
DIRECTORY
FILEDISC
TRACK
CD
4
Adjust the sound as you want (see
pages 22 – 24).
To drop the volume in a moment
Press SOURCE ATT for more than 1 second
while listening to any source. "ATT" rotates on
the display, and the volume level will drop in a
moment.
To resume the previous volume level, press the
button for more than 1 second again.
To turn off the power
Press and hold OFF 0 until "SEE YOU" appears
on the display.
• If you turn off the power while listening to a
CD, you can start CD playback from where you
have stopped next time you turn on the power.
Note:
When you use this unit for the first time, set the built-
in clock correctly, see page 8.
Note on display illustrations:
Illustrations will differ from what appears if
"CLOCK DISP" is set to "CLOCK OFF." See
page 27.
INT RPT RND OFF
9 12
To increase the volume.
To decrease the volume.
Volume level appears.
7