Storing Dab Services In Memory - JVC KD-LX333R Bedienungsanleitung

4
Select a service you want to listen
to.
1 Press BAND MODE (M).
BAND
MODE
"MODE" appears on the
M
display.
2 Press
select a service you want,
while "MODE" is still on the
display.
To change the display information while
tuning into an ensemble
Normally service name is shown on the display.
If you want to check the ensemble name or its
frequency, press DISP (D).
Each time you press the button, the following
information appears for a while on the display.
Service name
Ensemble name
Channel number
To tune in a particular ensemble without
searching:
1
Press SOURCE ATT to select DAB tuner as
the source.
2
Press BAND MODE (M) repeatedly to select
the DAB band (DAB1, DAB2 or DAB3).
¢ or 4
3
Press and hold
than 1 second.
¢ or 4
4
Press
ensemble you want is reached.
• If you hold down the button, the ensemble
keeps changing until you release the button.
¢ or 4
to
Frequency
for more
repeatedly until the
Storing DAB services in
memory
You can preset up to 6 DAB services in each
DAB band (DAB1, DAB2 and DAB3) manually.
1
Select the DAB tuner (DAB1 – 3).
1 Press SOURCE ATT to select
ATT
SOURCE
DAB tuner as the source.
2 If necessary, press and hold
BAND
MODE
BAND MODE (M) repeatedly
M
to select the DAB band
number (DAB1, DAB2 or
DAB3).
Each time you press and hold the button,
the DAB band changes as follows:
D1
(DAB1)
2
Tune in to an ensemble you want.
3
Select a service of the ensemble you
want.
1 Press BAND MODE (M).
BAND
MODE
"MODE" appears on the
M
display.
2 Press
select a service you want,
while "MODE" is still on the
display.
CONTINUED ON THE NEXT PAGE
D2 D3
(DAB2) (DAB3)
¢ or 4
to
39