• To adjust the input level of each source
—Vol Adj:
This setting is required for each source
except FM. Before making an adjustment,
select an appropriate source for which you
want to make an adjustment.
Once you have adjusted it, it is memorized,
and you will not need to adjust the volume
level each time you change the source.
Adjust the input level to match the FM
sound level.
• You cannot make an adjustment if the
source is FM. "FIX" will appear.
To increase the level
To decrease the level
Selecting preset sound modes
(iEQ: intelligent equalizer)
You can select a preset sound mode (iEQ:
intelligent equalizer) suitable to the music genre.
• There is a time limit in doing the following
procedure. If the setting is canceled before you
finish, start from step 1 again.
Available sound modes:
FLAT (No sound mode is applied)
H.ROCK (Hard Rock)
R & B (Rhythm and Blues)
POP (Popular music)
JAZZ (Jazz music)
DANCE (Dance music)
Country (Country music)
REGGAE (Reggae)
CLASSIC (Classical music)
USER 1, USER 2, USER 3
1
Press SEL (select) once.
The last selected sound mode
is called up.
The next-step-operation
buttons start flashing.
Ex.: If you have selected "Flat" previously
Each time you press the button, the
adjustable items change as follows:
iEQ
Canceled
• For SEL (basic sound) settings,
see pages 36 – 37.
• For METER (level meter) settings,
see page 39.
CONTINUED ON THE NEXT PAGE
Fad/Bal
Sub Out
METER
Vol Adj
37