Bluetooth Function Und Pairing; Changing The Location Of The Desk; Locking Or Releasing The Desk Fixation Element - Steelcase Flex Höhenverstellbarer Tisch Bedienungsanleitung

_______________________________________________________________
EN
If no action is taken within 2 minutes
after the reminder, the reminder function
will turn off automatically.
Always have the desk move up or down
until the desired or programmed height is
reached and the desk stops. This ensures
that the desk is horizontally aligned
(level) in the case of a one-sided load.

Bluetooth function und pairing

This function allows you to establish a BLUETOOTH
connection between the desk controller and a mobile
device with Bluetooth function.
Please note that a connection to the desk
can only be established using the
Steelcase Rise App.
To connect, proceed as follows:
18
Press the REM button
and the
display will show the timer logo
and the current memory time.
Press this button to set the
interval for how often you want to
receive a reminder to change
position.
The six intervals are:
- Interval 1: Reminder after 15
minutes of sitting
- Interval 2: Reminder after 30
minutes of sitting
- Interval 3: Reminder after 45
minutes of sitting
- Interval 4: Reminder after 60
minutes of sitting
- Interval 5: Reminder after 75
minutes of sitting
- Interval 6: Reminder after 90
minutes of sitting
When the light bar fills up, the
reminder interval is stored
Operating and adjusting
 Press the MEM2 and
 The Bluetooth symbol
 Once a connection is es-
Error codes
Error codes are always shown on the display with an
"E" for error followed by a number, e.g. "E16". The
most common error codes are also provided with an
extra function such as "E01" "INITIALISE". The
display alternates between a numeric code and a text
message.
The error code remains visible as long as you keep
the toggle switch pressed.
A complete list of error codes is provided in Section
6.
5.3 Changing the location of the
desk
The user can push the Flex Height Adjustable Desk at
any time to quickly and easily adapt to new
workspace concepts.
5.3.1 Locking or releasing the desk
fixation element
To move the desk, the fixation element (desk brake)
must first be released. After moving the desk, the
fixation element (desk brake) must be locked so that
the desk remains fixed in place at the desired
location.
REM buttons simultane-
ously for about 2
seconds.
now flashes in the dis-
play, followed by the ID
number of the control
unit.
tablished, the display
shows a larger Bluetooth
symbol and
"CONNECTED".
156631