Technical Specifications - voestalpine Bohler Welding TERRA 500 RC Bedienungsanleitung

8 TECHNICAL SPECIFICATIONS

Power supply voltage U1 (50/60Hz)
*
Zmax (@PCC)
Slow blow line fuse
Communication bus
Maximum input power (kVA)
Maximum input power (kW)
Power factor PF
Efficiency (μ)
Cos
Max. input current I1max
Effective current I1eff
MMA duty factor (40°C)
(x=50%)
(x=60%)
(x=100%)
MMA duty factor (25°C)
(x=80%)
(x=100%)
Adjustment range I2
MMA open circuit voltage Uo
IP Protection rating
Insulation class
Dimensions (lxdxh)
Weight
Manufacturing Standards
Power supply cable
Length of power supply cable
*
This equipment complies with EN/IEC 61000-3-11 if the maximum permissible mains impedance at the interface point to the public grid
(point of common coupling, PCC) is smaller than or equal to the Zmax stated value. If it is connected to a public low voltage system, it is
the responsibility of the installer or user of the equipment to ensure, by consultation with the distribution network operator if necessary, that the
equipment may be connected.
*
This equipment does not comply with EN/IEC 61000-3-12. If it is connected to a public low voltage system, it is the responsibility of the
installer or user of the equipment to ensure, by consultation with the distribution network operator if necessary, that the equipment may
be connected. (Consult the "Electromagnetic fields & interferences" - " EMC equipment classification in accordance with EN 60974-10/A1:2015"
section).
TERRA 500 RC
3x400V±15%
-
40A
DIGITAL
29.7kVA
22.2kW
0.74
90%
42.1A
29.7A
500A
470A
420A
500A
470A
3÷500A
61Vdc
IP23S
H
620x240x460mm
27.3kg.
EN IEC 60974-1/A1:2019
EN 60974-10/A1:2015
4x6mm2
5m
29