cecotec TOTALPURE 3IN1 VISION Bedienungsanleitung Seite 30

ENGLISH
decrease the fan speed.
The Cool mode has 9 speed levels. The Heat mode has 4 speed levels.
Fig. 10.
When the Heat mode is activated, the numbers will be displayed in orange colour.
Press the Heat mode button to activate this mode.
Note: There is no Turbo or Sleep function under Heat mode.
Fig. 9.
Under the Heat mode, use the "+" and "-" buttons on the remote control to set the desired
temperature (1 ºC-30 ºC).
Note: These buttons will not work under the Cool mode.
Fig. 11.
Press the Timer button on the remote control to program the device from 1 to 8 hours.
Filter replacement
This device is equipped with a purifying air filter.
To replace it, follow the below instructions.
Fig. 15.
Fig. 12.
Rotate the top cover of the main body anticlockwise to unlock it and pull the filter out.
Fig. 14.
Separate the assembled top cover from the filter.
Assemble the new filter to the top cover of the main body.
Fig. 16.
Assemble the new filter and the cover back onto the main body and turn it clockwise until
fixed.
Using the device from the control panel
Fig. 17.
Connect the device to a power supply and turn the power switch on. The device will enter
standby mode.
Press the power button to activate the fan mode. Press and hold the power button for 2
seconds to stop the fan mode.
While the device is operating, press the power button to select the desired fan speed level,
from 1 to 9.
Oscillation
Press and hold the power button on the control panel for 1 second, the device will beep once,
and the fan will start oscillating.
Press and hold the power button on the control panel for 1 second, the device will beep once,
TOTALPURE 3IN1 VISION
30