Gude HPC 200 Bedienungsanleitung Seite 12

Dirt devil/variable angle nozzle
To use the dirt devil/variable angle nozzle, screw the respective attachment onto the HP gun.
Variable angle nozzle
Adapter for the foam injector and wash brush connection.

Connect the high pressure cleaner to a 230 Volt/50 Hz power source.

After you have connected all parts, then open the water supply.

Start the device with the ON/OFF switch (8).

The device is now ready for operation.
Behaviour in case of emergency
Provide necessary first aid treatment corresponding to the injury nature and seek qualified medical help as soon as possible.
Protect the injured person from other injuries and calm him/her down.
First aid kit must always be available in the place of your work in case of accident in accordance with DIN 13164. Material
taken out of the first aid kit needs to be supplemented right away.
If help is needed, please provide the following details:
1. Place of accident
2. Accident nature
3. Number of injured persons
4. Injury type
The desired spray pattern can be adjusted by turning the variable
angle nozzle.
To connect the foam injector or the wash brush, first screw the
supplied adapter onto the HP gun; the foam injector or the wash
brush can now be attached to the adapter.
12