Troubleshooting For Users; Exceeding Heating Period; Light Does Not Operate - Sentiotec K2 NEXT Montage- Und Gebrauchsanweisung

Instructions for use for the user

12. Troubleshooting for users

Refer to Fig. 4 (page 16).

12.1. Exceeding heating period

Problem: "00.00" is flashing in the display 6.
Cause: After running for 6 hours, the sauna control unit automatically switches
off the sauna heater for safety reasons (heating period limit).
How to solve the problem:
To start up the sauna control unit again, press and release the time button 5.
► The sauna heater is switched on and begins to heat up.
► The control light 1 lights up.

12.2. Light does not operate

How to solve the problem:
1. Switch off the sauna control unit using the ON//OFF switch 4.
2. Switch off the main fuse of the sauna control unit in the fuse box.
3. Change the bulbs used for lighting the sauna.
4. Switch the main fuse back on.
5. Press switch 3.
► If the light still does not operate, inform your supplier.
WORLD OF WELLNESS
p. 22/26