Starting The Sauna On A Time-Delay Basis (Operation With Preset Time); Deleting The Preset Time - Sentiotec K2 NEXT Montage- Und Gebrauchsanweisung

Instructions for use for the user
9.4. Starting the sauna on a time-delay basis
(operation with preset time)
WARNING!
Risk of fire
Flammable objects that are placed on the sauna heater could ignite and
cause fires.
● NEVER place flammable objects on the sauna heater.
● Make sure that NO flammable objects have been placed on the sauna
heater before you activate the preset timer function.
You can set the preset time to increments of 15 minutes. The maximum preset
time totals 23 hours and 45 minutes. The preset time is displayed in hours and
minutes, e.g. 8 hours and 15 minutes is displayed as 8.15.
1. Use the temperature selector 2 to set the preferred sauna temperature.
The further it is turned to the right, the higher the sauna cabin temperature.
2. Press and hold the time button 5.
► The control light 1 goes out.
► The preset time is reset to zero and then increases in increments
of 15 minutes.
3. Once you have reached the required preset time, release the time
button 5.
► The timer is running, and the remaining preset time appears
in the display 6.
► The point between the hours and minutes on the display 6 flashes.
► Once the preset time has elapsed, the sauna heater switches on.

9.5. Deleting the preset time

Briefly press the time key 5.
► The preset time is deleted.
► The control light 1 lights up.
WORLD OF WELLNESS
p. 18/26