Advanced Settings - Bresser WIFI ClearView 7in1 Bedienungsanleitung

19 Advanced settings

1
2
3
4
5
1 Select 'SETUP' to enter the settings menu
3 Temperature calibration indoor/outdoor and
channel 1-7
5 Latest firmware
7 Select unit
16 / 40
SETTINGS
SETUP
Temperature o C
Indoor
Current off set: 1
Outdoor
Current off set: - 9
CH 1
Current off set: 2
CH 2
Current off set: 3
CH 3
Current off set: 1.2
CH 4
Current off set: -0. 2
CH 5
Current off set: -20. 1
CH 6
Current off set: 1 1.5
CH 7
Current off set: 0.2
Range: -20.0 ~ 20. 0 o C
-36.0 ~ 36. 0 F (Default: 0.0)
o
Pressure
Absolute Pressure Of fset:
Relative Pressure Of fset:
Setting Range:
-560~ 560hpa / -16.54 ~ 16.54inHg / -420 ~ 420mmH g
*Rain gain:
*Wind speed gain:
*Wind direction:
*UV gain:
*Light gain:
* Depends on the model
Firmware version: 1.00
ADVANCED
Humidity %
Current off set: - 5
Current offset: 1 0
Current offset: - 5
Current offset: - 2
Current offset: - 2
Current offset: - 5
Current offset: - 3
Current offset: -10
Current offset: - 3
Range: -20 ~ 20
(Default: 0.0 )
hpa
Current off set: - 3
(Default: 0 )
Current off set: 1 0
(Default: 0 )
Current gain: 0.8 5
Range: 0.5 ~ 1.5(Default: 1.00)
Current gain: 0.7 5
Range: 0.5 ~ 1.5(Default: 1.00)
Current off set: 2
o
Range: -10 ~ 10(Default: 0 )
o
Current gain: 1.1
Range: 0.01 ~ 10(Default: 1.00)
Current gain: 1.1
Range: 0.01 ~ 10(Default: 1.00)
Browse
Upload
2 Select unit
4 Pressure calibration section
6 Pressure calibration indoor/outdoor and chan-
nel 1-7
8 Enter an offset value to compensate for the
measured pressure value
6
7
8
9
10