Alarm Settings - Bresser Tendence FSX Bedienungsanleitung

10 Manual time setting and other user defined
settings
1.
2.
3.
4.
5.
6.
7.
8.

11 Alarm settings

1.
2.
3.
4.
12 / 100
Press the SNOOZE/LIGHT button for about 8 seconds to
deactivate the automatic time setting. The reception
symbol for the radio-controlled watch disappears from
the display.
In normal display mode, press the TIME button for
about 2 seconds to enter the settings mode.
Digits to be set are flashing.
Press CH/UP or 12/24/DOWN button to change the
value.
Press the TIME button to confirm and switch to the next
setting.
Sequence of the settings: Year > Change day/month
display > Month > Day > Daylight saving time (DST)
AUTO/OFF (off) > Hours > Minutes > Seconds > Lan-
guage > Time zone (-23 to +23 hours)
Finally press the TIME button to save the settings and
exit the settings mode.
NOTICE! To restore the automatic time setting, press
the SNOOZE/LIGHT button again for 8 seconds. The re-
ception symbol for the radio-controlled watch re-
appears in the display.
In normal display mode, press the TIME button several
times to display the Alarm time AL1 or AL2.
Press ALARM button for approx. 3 seconds to enter the
alarm time setting mode.
Digits to be set are flashing.
Press CH/UP or 12/24/DOWN button to change the
value.