Microlife WatchBP Office ABI Bedienungsanleitung Seite 22

Taking measurements using WatchBP Ofice ABI (cont.)
5) Press the M Button to switch between left(L) and
right(R). Press the Start/Stop Button to save the
setting.
ROUTINE
6) Start measurements – Press the Start/Stop
Button to start the measurements.
15-second
countdown...
20
7) Three consecutive measurements – The device
ROUTINE
8) Inlation by fuzzy logic – The device will adjust
9) The average value of the measurements–
ROUTINE
*
*
will take three consecutive measurements with
15 second intervals in between on default.
15
1
seconds
inlation pressure by fuzzy logic technology.
The average values will be displayed when the
measurements are completed and will be saved
to the memory automatically.
The user can manually set the measurement intervals
of 15, 30, 45 or 60 seconds in ROUTINE Mode. (Please
refer to special functions section page 19 "Setting up
measurement intervals")
The number of measurements in ROUTINE mode can be
set at two by request.
15 3
2
seconds