Belkin N1 Vision Installationsanleitung Seite 36

Alternate Setup Method
Step 4 Configuring your N1 Vision for Connection
to your Internet Service Provider (ISP)
The "Internet/WAN" tab is where you will set up your N1 Vision to connect to
your Internet Service Provider (ISP). The N1 Vision is capable of connecting
to virtually any ISP's system provided you have correctly configured the N1
Vision's settings for your ISP's connection type. Your ISP connection settings
are provided to you by your ISP. To configure the N1 Vision with the settings
that your ISP gave you, click "Connection Type" (A) on the left side of the
screen. Select the connection type you use. If your ISP gave you DNS settings,
clicking "DNS" (B) allows you to enter DNS address entries for ISPs that
require specific settings. Clicking "MAC Address" (C) will let you clone your
computer's MAC address or type in a specific WAN MAC address, if required
by your ISP. When you have finished making settings, the "Internet Status"
indicator will read "connection OK" if your N1 Vision is set up properly.
(A)
(B)
(C)
34