Stop Light; Number Plate Light - Ducati SUPERBIKE 749R 2006 Anleitung- Und Instandhaltungsheft

Stop light (fig. 72)
To replace the rear stop and parking light bulbs, unscrew
the two screws (1) that fasten the cover (2). The cover (2)
has two retaining pins inside, which hold the tail light
lens (3) in place. Remove the cover (2) from its seat
and remove the tail light lens (3). The bulb has a bayonet-
type base: to remove, press in and turn anticlockwise.
E
Replace the bulb and re-insert by pressing in and turning
clockwise till it clicks into place. Refit any parts that were
removed.
Number plate light (fig. 73)
To access the number plate light bulb, unscrew the two
screws (4) that fasten the cover (5). Extract the bulb and
replace.
72
3
2
5
3
1
4
fig. 72
fig. 73