Clock setting
Hold down the button (1, fig. 8) for at least 2 seconds.
To select AM/PM, press button (2, fig. 8). Press the
button (1) to confirm, then go on to set the hours.
Use button (2) to adjust the hour display. Press the
button (1) to confirm, then go on to set the minutes.
Use button (2) to adjust the minute display. Press button (1)
E
to confirm and exit clock setting mode.
Resetting the trip meter
Select the TRIP indicator on the display (3, fig. 8).
Press button (2) for at least 2 seconds to reset the trip
distance counter on the display.
2
1
3
fig. 8
15