Waeco MOBITRONIC RV-550/SWM Montage- Und Bedienungsanleitung Seite 11

RV-550/SWM
No. in 1,
page 3
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
➤
Connect the individual components as shown in the circuit diagram 1, page 3.
➤
Insulate the cable not used 1 9, page 3.
➤
Set the dip switches of the switch box as described in the appropriate
operating manual.
Description
Camera
6 pin mini-DIN plug
6 pin mini-DIN socket
Camera switch box connection cable (black)
5 pin mini-DIN plug
Switch box
6 pin mini-DIN socket (camera connection)
Brown cable: connection to earth (terminal 31)
Red cable: switch box connection to 12 V
Cinch socket: AV output for connecting a second monitor or
a video recorder
5 pin mini-DIN socket (reversing monitor connection)
Green control cable for connection to the positive cable of the
reversing light.
When you shift into reverse gear, the control box is activated via
this line.
Monitor switch box connection cable (grey)
Black control line with round plug fitting for connection to the
monitor's signal input (green).
The monitor is switched on via this line when the control box
is activated.
Black control line with flat plug fitting for connection of the
RV-AMP-SW rocker switch
This line must be connected when a video source in addition
to the rear view video camera – such as a navigation system
or DVD player – is connected to the monitor and you would
like to activate the camera when the vehicle is parked or you
are driving forwards.
Reversing light
Connecting the RV-550/SWM
11