Master/Slave Operation With Several Light Sets; Operation With The Foot Switch (Optional) - EuroLite LED KLS Scan Next FX Bedienungsanleitung

Master/slave operation with several light sets

Several devices may be interconnected (max. 32). Then all slave units can be synchronized and controlled
with the master unit without the need for a DMX controller. The devices must be set to the corresponding
operating modes.
1 Configure all slave units before connecting the master unit. For this, call operating mode SLAVE in the
menu and confirm with ENTER.
2 Connect the DMX output of the master unit to the DMX input of the first slave unit. Then connect the
DMX output of the first slave unit to the DMX input of the second slave unit, etc. until all units have been
connected in a chain. Make sure the master unit is the first in the chain. Do not connect a DMX controller
to the DMX input of the master unit.
3 Select the desired show program or color mode at the master unit. The interconnected light sets will now
operate synchronously.

Operation with the foot switch (optional)

POWER
AUTO
The optional wireless foot switch allows convenient control of the light set over a distance of up to 30 meters
(line-of-sight). The foot switch will only work in stand-alone mode, it will not work in DMX or slave mode. The
foot switch provides quick access to the show programs in automatic mode or sound control mode and a
color mode with preset colors.
1 Insert the 9 V battery provided into the battery compartment at the bottom. Then switch on the foot
switch with the rear on/off switch. The POWER indicator at the top will light up. When pressing a pedal,
the TRANSMITTER indicator will light up for confirmation.
2 Shortly press pedal AUTO to switch between the show programs in automatic mode. They will be
indicated in the display. A longer actuation of the pedal switches between color switch and color fade.
3 Press pedal MUSIC repeatedly to switch between the show programs in sound-controlled mode. They
will be indicated in the display. A longer actuation of the pedal switches between color switch and color
fade.
4 Press pedal COLOR to select 14 different preset colors for color mode. The derby, LED spots and
scanners will emit the color adjusted.
5 Shortly press pedal BLACKOUT to switch off the LEDs. Press the pedal again to turn the LEDs back on.
A longer actuation of the pedal regulates the brightness of the LEDs.
6 The foot switch can be deactivated in the system settings under the menu item System > FOOT.
7 After use, switch off the foot switch in order to save the battery.
TRANSMITTER
MUSIC
40/56
COLOR
00132156, Version 1.0
BLACKOUT