Operation; Getting Started - Opex Falcon+ Betriebsanleitung

4.1. Getting Started

Power up the system:
If the Falcon+ system is not already up and running, turn on the power:
1. Turn on the main power switch (see
2. Press the power button on the UPS. The monitor will turn on and the
computer will begin to boot up.
3. Log in to Windows with your Windows/network user name and password. If
your Falcon+ is not connected to a network, you may not have to log in to
Windows first. Proceed to step 4. Once the computer has finished booting
Windows, it will launch the Falcon+ CertainScan application.
Note: If you mistakenly close CertainScan, double-click the icon on the
desktop to start it again. Depending on the model, the icon will state either
FalconPlus, or FalconVPlus (see Figure 4-1).
Log in to the system:
1. On the vertical menu bar, select the icon for your user account (see
Figure 4-2).
Note: If you do not have your own user account, ask your Falcon+ Adminis-
trator for assistance.
32
Figure 3-1 on page
Figure 4-1: Icon for CertainScan
Falcon+ Operator Manual
OPEX Corporation
18).

Operation