Assigning Page Sub-Types; To Assign A Page Sub-Type - Opex Falcon+ Betriebsanleitung

Note: This feature does not work with Virtual pages. For more on Virtual Page
Types, see "CertainScan Manual - Advanced Features".

4.3.6. Assigning Page Sub-Types

If one or more of the page types in your job contains sub-types, you must
assign the item a sub-type before scanning it into the system. Page Sub-Types
must be enabled in the General Page Type Parameters in order for this feature
to appear.

4.3.7. To Assign a Page Sub-Type:

1. While running a job, press the appropriate page type button. For example, if
you are scanning forms into the system, press the Forms Page Type
Button (see Figure 4-43).
2. Select from the available page sub-types.
3. Scan the item.
80
Figure 4-42: Lock Page Type
Figure 4-43: Assigning a Page Sub-Type
Falcon+ Operator Manual
OPEX Corporation
A red box around a page
type button indicates
that the lock is in place.
Operation