Accessories; Making Ice Cubes (Icematic) - Franke FCT 480 NF XS E Bedienungsanleitung

Accessories

(In some models)

Making ice cubes (Icematic)

• Take out the ice making tray
• Fill the water to the line.
• Place the ice making tray in its original position
• When ice cubes are formed, twist the lever to drop ice cubes into the icebox.
Note:
• Do not fill the icebox with water to make
ice. This may damage it.
• The movement of the ice maker may be
difficult while the refrigerator is running.
In such a case it should be cleaned by
removing the glass shelves.
Removing the Ice maker
• Remove the freezer glass shelves
• Remove the icemaker by pulling left or right
on the shelf.
You can remove the icemaker to increase the
available volume in the freezer compartment.
Ice tray
• Fill the ice tray with water and place in the freezer compartment.
• After the water has completely turned into ice, you can twist the tray as shownbelow to
remove the ice cubes.
(In some models)
EN -44-