Helpful Hints And Tips; Cookware For Induction Cooking Zones; Operating Noises; Energy Saving - AEG HC451220EB Benutzerinformation

32

Helpful hints and tips

• you put something on the control panel.
Activation of the sounds
Deactivate the appliance.
Touch for 3 seconds. The displays come on and go out. Touch
comes on, because the sound is off. Touch
HELPFUL HINTS AND TIPS
Use the induction cooking zones with suitable cookware.

Cookware for induction cooking zones

For induction cooking zones a strong electro-magnetic field creates the heat in the cook-
ware very quickly.
Cookware material
• Correct: cast iron, steel, enamelled steel, stainless steel, the bottom made of multi-layer
(with correct mark from a manufacturer).
• Not correct: aluminium, copper, brass, glass, ceramic, porcelain.
Cookware is correct for an induction hob if ...
• ... some water boils very quickly on a zone set to the highest heat setting.
• ... a magnet pulls on to the bottom of the cookware.
The bottom of the cookware must be as thick and flat as possible.

Operating noises

If you can hear
• cracking noise: cookware is made of different materials (Sandwich construction).
• whistling: you use one or more cooking zones with high power levels and the cookware
is made of different materials (Sandwich construction).
• humming: you use high power levels.
• clicking: electric switching occurs.
• hissing, buzzing: the fan operates.
The noises are normal and do not refer to any defects.

Energy saving

• If possible, always put the lids on the cookware.
• Put cookware on a cooking zone before you start it.
Öko Timer (Eco Timer)
To save the energy, the heater of the cooking zone switches itself off earlier than count
down timer signal. The heating time reduction depends on cooking level and cooking time.
, comes on. The sound is on.
for 3 seconds.