1- Ec Declaration Of Incorporation Of Partly Completed Machinery - TOPP C240 Installations- Und Wartungsanleitungen

IT 1
EC DECLARATION OF INCORPORATION OF PARTLY COMPLETED MACHINERY
The undersigned, in the name of and behalf of the following company
Topp S.r.l.
Via Galvani, 59
36066 Sandrigo (VI)
Italia
herewith declares
that the person authorised to compile the technical file is
Name: Bettiati Roberto - Topp S.r.l.
Address: via Galvani,59 36066 Sandrigo (VI)
and
that to the partly completed machinery
Type:
Model(s):
the following essential requirements of the following EC directive (including all applicable
amendments)
2006/42/EC Machinery Directive (Italian adoption DLgs 27 jan. 2010, n.17)
have been applied and fulfilled:
Enclosure I: 1.5.1; 1.5.2; 1.5.10; 1.5.11
and that the relevant technical documentation is compiled in accordance with part B of
Annex VII of the above mentioned Machinery Directive.
The above identified partly completed machinery is also in conformity with the all the
relevant provisions of the following EC directives (including all applicable amendments)
2014/30/EU EMC Directive
2011/65/EU ROHS II Directive
The following harmonised standards have been applied:
EN 55014-1
EN 61000-3-3
EN 62233
EN 60335-1
The undersigned also undertakes the obligation, in response to a duly reasoned request by the
national market surveillance authorities, to transmit to the a.m. authorities, in electronic or
paper format, the relevant technical documentation on the partly completed machinery.
The above identified partly completed machinery must not be put into service until the final
machinery into which it is to be incorporated has been declared in conformity with the
provisions of the above mentioned Machinery Directive.
This declaration of conformity is issued under the sole responsibility of the manufacturer and is
valid for products built from the date specified below.
Date: Sandrigo, 01/01/2017
14
CHAIN ACTUATOR FOR WINDOW AUTOMATION
C240
C240/230V - C240/24V; C240L/230V - C240L/24V
EN 55014-2
EN 61000-6-2
EN 50581
Applicable parts of EN 60335-2-103
Signature: Matteo Cavalcante
Administrator .......................................................
INSTALLATION AND USE INSTRUCTIONS
ORIGINAL
EN 61000-3-2
EN 61000-6-3
EN C240