Haier HW90-B14636N Gebrauchsanleitung Seite 9

GB
3.4 Detergent drawer
Open the drawer, three compartments can be
seen (Fig. 3-5):
Compartment 1 : Water inlet only, no detergent
Compartment 2 : Detergent for programme
Compartment : Softener, Conditioning agent etc.
The recommendation on the type of detergents is
suitable for the various washing temperatures, please
refer to the manual of detergent.
3.5 Function buttons
The function buttons (Fig. 3-6) enable additional op-
tions in the selected programme before programme
starts. The related indicators are displayed.
gramme, all options are disabled.
If a button has multiple options, the desired option can
be selected by pressing the button sequentially.
To delete the setting or to cancel the setting process,
press the function button until the desired LED lights
Note: Factory settings
there is no special requirement default settings are recommended.
3.5.1-Function button " Temp."
Press this button (Fig. 3-7) to change the washing
temperature of the programme. If no value is illumi-
nated the water will not be heated.
In conjunction with the "Steam" button, the child lock
3.5.2-Function button "Speed"
Press this button (Fig. 3-8) to change or deselect the
spin of the programme. If no value is illuminated the
laundry will not spun.
3.5.3-Function button "Steam"
Press this button (Fig. 3-9) to activate the steam function.When this function is activated
the default temperature is the maximum temperature of the programme selected.This
function can be activated only with the following programmes: Cotton, Synthetic, Mix,
Baby Care, Hygiene.When the function is activated the led above the button will light up.
Pushing again this button the function can be deactivated and the led above the button
will turn off.When the function is activated the temperature of the programme cannot
be changed.
( )
3-Control panel
Speed
Temp.
-
3.5.1 3.5.2
Temp.
3-5
3-6
Steam Extra rinse
Delay
3.5.3 3.5.4 3.5.5
3-7 3-8
Speed
9