Herunterladen Inhalt Inhalt Diese Seite drucken

In Case Of Power Failure - Haier HW90-B14636N Gebrauchsanleitung

Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

9-Troubleshooting
Problem
Excessive foam floats
drum and/or deter-
gent drawer.
Automatic adjust-
ment of washing
time.
Spinning fails.
Unsatisfactory wash-
ing result.
Washing powder
residues are on the
laundry.
Laundry has grey
patches.
Note: Foam formation
If too much foam is inspected during spin cycle, motor stops and drain pump will be ac-
tivated for 90 seconds. If that elimination of foam fails up to 3 times, programme ends
without spinning.
ance, disconnect the power supply and contact the customer service.
9-1
24
Cause
• Detergent is not a appropriate.
• Excessive use of detergent.
• Washing programme duration will
be adjusted.
• Unbalance of laundry.
• Degree of pollution does not agree
with selected programme.
• Detergent quantitiy was not suf- • Choose the detergent accord-
• Maximum load has been exceeded.
• Laundry was unevenly distributed
in the drum.
• Insoluble particles of detergent can
remain as white spots on the laun -
dry.
• Caused by fats such as oils, creams
or ointments.

9.4 In case of power failure

A
The current programme and its setting will be saved.
When power supply is restored operation will be re-
sumed.
In case of power failure during programme run door
opening is mechanically blocked. If the laundry is to
be removed, the water level must not be visible in the
glass door. Danger of scalding!
Lower the water level according to step 1 to 6 of
chapter CARE AN CLEANING (PUMP FILTER).
Pull lever (A) beneath service flap (Fig. 9-1) until
door is unlocked by a gentle click.
Fix all parts and close the service flap.
Solution
• Check detergent recommen-
dations.
• Reduce amount of detergent.
• This is normal and doesn't af-
fect functionality.
• Check machine load and laun-
dry and run a spinning pro-
gramme
again.
• Select an other programme.
ing to the degree of pollution
and according to manufacturer
• Reduce loading.
• Loose the laundry.
• Perform extra rinse.
• Try to brush the points from the
dry laundry.
• Choose an other detergent.
• Pretreat the laundry with a spe -
cial cleaner.
GB
-

Quicklinks ausblenden:

Werbung

Kapitel

Inhaltsverzeichnis
loading

Diese Anleitung auch für:

Hw80-b14636nHw80-b16636n

Inhaltsverzeichnis