Accessories And Spare Parts - Kärcher BDS 43/150 C Classic Bedienungsanleitung

 Wash contaminated pads at a max.
temperature of 60 °C.
 Clean the casing with a damp cloth.
 Check the mains connection cable for
damages.
Troubleshooting
DANGER
Risk of injury. Pull the plug from the mains
before carrying out any tasks on the appli-
ance.
In case of faults that cannot be remedied
using the table below please contact the
customer service.
Fault Remedy
Insuffi- Replace contaminated pads
cient and wash them at a max. tem-
cleaning perature of 60 °C.
result
Replace worn disc brush / pad.
Rinse contaminated disc
brushes with water
Check the suitability of brush/
pad and detergent for the re-
spective use.
Appliance Check for correct seating of
vibrates disc brush/pad.
strongly
Check pad attachment.
Position the handle lower.
Pad does Reset fuse of brush drive.
not turn
Check if foreign bodies are
blocking the brush/pad; re-
move the foreign bodies if re-
quired.

Accessories and Spare Parts

Only use original accessories and spare
parts, they ensure the safe and trouble-free
operation of the device.
For information about accessories and
spare parts, please visit www.kaerch-
er.com.
Description
BDS 43/150 C pad drive
board
BDS 43/Duo C pad drive
board
Scrubbing brush (red)
Disc brush, hard (black)
Shampooing brush, medium
soft (white / blue)
Polishing brush
Polishing pad
Pad, microfibre, set (5x)
Diamond pad, coarse
(white), set (5x)
Diamond pad, medium (yel-
low), set (5x)
Diamond pad, fine (green),
set (5x)
Pad, melamine (grey/white),
set (2x)
Pad, soft (white), set (5x)
Pad, medium (red), set (5x) 6.369-470.0
Pad, medium hard (green),
set (5x)
Pad, hard (black), set (5x)
Water tank complete
Add-on kit additional weight 2.642-802.0
– 5
EN
Order No.
6.369-899.0
6.369-901.0
6.369-895.0
6.369-898.0
6.369-896.0
6.369-897.0
6.371-149.0
6.905-526.0
6.371-256.0
6.371-257.0
6.371-238.0
6.371-023.0
6.369-469.0
6.369-472.0
6.369-473.0
9.753-058.0
13