General Safety Warnings - Corradi DOMINO Benutzerhandbuch

Domino

GENERAL SAFETY WARNINGS

Important safety instructions
Caution:
For personal safety it is important to follow these instructions.
Keep these instructions.
General warnings
Each Corradi product has a specific function described in this manual; any other use and different from the one indicated, the use of non-original
components, any tampering and/or unauthorised technical modification, relieves Corradi from any responsibility for any injuries to persons and
animals and damage to property deriving from the activity.
Any modifications made personally or by third parties not authorised by Corradi (tampering, technical modifications, etc.) on Imago Platform or
its components during the warranty period immediately renders the warranty void. In this case and in these conditions, Corradi will be relieved
from any liability and from any direct or indirect consequential obligation deriving from the unauthorised work.
Please always keep in mind that each moving part can represent a hazard.
Corradi reserves the right to modify its products at any time, at its sole discretion and without notice.
Installation
Product installation must be performed only by qualified technical personnel (installers and electricians), who have received appropriate training
and have been authorised by Corradi.
Personnel must also meticulously observe safety regulations in force.
Safety during maintenance operations
All maintenance inspection, repair or adjustment operations of the product must be performed by qualified technical personnel.
Cleaning with ladders, scaffolding or other equipment should be done by specialised personnel only.
During all cleaning and maintenance operations of the product it is always required to disconnect the electrical power. It is advised to put a
warning sign on the power supply main switch with the following indication: "Do not touch. Service personnel at work".
Make sure that no operator is in the vicinity of the structure before turning it back on after a maintenance operation.
6 of 10
Symbols
Symbols are employed to draw the user's attention to
specific subjects for the safety of people, of the product, or
to indicate special operating conditions.
Attention
general hazard - possibility of damage to people,
property, components.
Attention electrical hazard.
Attention shearing/crushing hazard.
CORRADI SRL - USER MANUAL Rev. 0 - 06.2020