Deleting Transmitters - Becker Centronic EasyControl EC411-III Montage- Und Betriebsanleitung

Deleting transmitters

Deleting individual transmitters
The programmed master transmitter cannot be deleted. It
can only be overwritten.
3s
3s
10s
28 - en
Press the programming button on the master
transmitter for 3 seconds.
▻ The receiver confirms.
Now press the programming button of the trans-
mitter to be deleted for 3 seconds.
▻ The receiver confirms.
Then re-press the programming button of the
transmitter to be deleted for 10 seconds.
▻ The receiver confirms.
► The transmitter is now deleted from the radio
receiver.